Instructions

Step 1: Remove rubber inserts or metal graters.

Step 2: Put aside.

Step 3: Place comfort pad on iron nylon side down.

Step 4: Hold pad in place and turn over.

Step 5: Bend pad over iron making sure holes on both ends align.

Step 6: String ties through pads.

Step 7: Pull ties, but do not tighten fully.

Step 8: Bend pads back and forth to loosen the pads.
Squeeze pad ends together while pulling ties tight.

Step 9: After all ties are pulled tight, remove excess tie ends.

Step 10: If properly installed, your Iron Pads will not move